News

January 01, 2019

REMS Akku-Cento 22 V

REMS Akku-Cento 22 V – Mobile cutting and deburring up to Ø 115 mm. Super fast. Right angled. Chip-free. No outer burr. Dry cutting. Li-Ion Technology. Universal for many pipe types.

Light, portable compact machine. Universal for cutting and deburring pipes and tubes. For trade and industry. For the building site and the workshop. Li-Ion Technology. For battery and corded operation.
Stainless steel pipes of pressfitting systems, carbon steel, copper Ø 8–108 mm,
Steel pipes DIN EN 10255 (DIN 2440) DN 10-100, Ø 1/4-4'', Ø 14-115mm,
Cast iron pipes (SML) EN 877 (DIN 19522) DN 50-100,
Plastic pipes SDR 11 Ø 10-110mm, wall thickness s ≤ 10mm,
Multilayer composite pipe Ø 10-110mm.
 


January 01, 2019

REMS ROS P 26/SW 35

REMS ROS P 26/SW 35 – Fast cutting in one go up to 26 mm. With integrated pipe cutter for protective plastic corrugated tubes up to Ø 35mm.


 

Robust quality tool for clean, fast cutting of pipes. With integrated pipe cutter for protective corrugated tubes. Stable magnesium version. For one-hand operation.
P plastic tubes, composite tubes ≤ Ø 26 mm, ≤ Ø 1”
SW protective corrugated plastic tubesf Ø 18-35 mm, Ø 3/4-1 3/8”
 

January 01, 2019

REMS Frigo 2 F-Zero

REMS Frigo 2 F-Zero electrically freezing instead of draining.
Super fast up to 2". High cooling capacity, e.g. 3/4" steel pipe in only 9 min*. Very small, patented deep-freezer heads, quickly assembled. Temperature display with LCD digital thermometer.

*ambient/water temperature 20°C.


 

Easy, fast freezing of pipes which are not drained. Closed refrigerant circuit. Environmentally safe. For repair and extension of piping systems.
Steel, copper, plastic, composite pipes Ø 1/8–2" Ø 10–60 mm.
Internal refrigerant: R-290.
 

January 01, 2019

REMS Akku-Curvo 22 V


REMS Akku-Curvo 22V – wrinkle-free bending of pipes.
Universal for many pipes and tubes. Ready to use immediately without setting. Fast and creep speed operation with immediate stop for precise bending. Quick change of bending and back formers. Li-Ion 21.6V, 5.0 Ah battery for 50% more bends compared with Li-Ion 18V, 3.0 Ah battery.
 

Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Can be used anywhere, without vice. For trade and industry. For the building site and the workshop. Li-Ion Technology. For battery and corded operation.
Hard, half-hard, soft copper tubes, also thin-wall Ø 10–28 mm, Ø 3/8–11/8"
Coated soft copper tubes, also thin-wall Ø 10–18 mm
Thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø 3/8–11/8"
Pipes of press fitting systems made of stainless steel, carbon steel, also coated Ø 12–28 mm
Soft precision steel tubes Ø 10–28 mm
Steel pipes EN 10255 Ø 1/4–3/4"
Electric conduit DIN EN 50086 Ø 16–25 mm
Multi-layer composite tubes Ø 14–40 mm
 


January 01, 2019

REMS Akku-Cat 22 V ANC VE



REMS Akku-Cat 22V ANC VE – saws anything, anywhere.
Extremely versatile and powerful. Li-Ion 21.6V, 5.0 Ah battery for 50% more cuts compared with 18V, 3.0 Ah.




 

Powerful, robust, handy electric tool for universal free-hand sawing. No cable. Only 3.1 kg. Ideal for assembly, dismantling, repair. Li-Ion 22V Technology. For battery or mains operation.
Many materials, e.g. wood, wood with nails, pallets, metal, even stainless steel, cast iron, breeze blocks, plaster boards, pumice stone, brick. Especially also for steel pipes.

 

January 01, 2019

REMS Herkules XL 12"

REMS Herkules XL 12" extra stable for pipes up to 12".  


 

Height adjustable material support with ball guide for rotating and standing tubular and solid material. For trade and industry. For the building site and the workshop.
Pipes, solid material Ø (1/8) 1 1/4–12", Ø (6) 42 –324 mm
Load capacity ≤ 450 kg


 

August 01, 2018

REMS Secco 50

REMS Secco 50 - for drying and dehumidifying

Powerful, highly efficient air dehumidifier/building drier for drying rooms, e.g. after mains water damage, flooding, dehumidification of damp cellar rooms etc. and for fast drying of concrete, masonry, plaster and screed for example.
Dehumidification rate ≤ 50 l/24 h, air volume ≤ 265 m³/h


 

May 16, 2018

THE SELECTION OF WINNERS

For purchases between May 14 until July 15 of one or more products from our 'THE SELECTION OF WINNERS' promotion you will receive attractive give-aways. Find all information and conditions regarding give-aways under: https://promotion.rems.de
 


March 15, 2018

REMS Calc-Push

 

REMS Calc-Push – effective electric decalcifying. High displacement. 3-way lever for reversal of flow direction, with zero setting.

 

 

Powerful, electric decalcifying pump for effective decalcifying of pipes and containers, e.g. flow heaters, boilers, hot water tanks, cold water tanks, heat exchangers, heating and cooling systems.
 
Useful container volume                                21 l
Displacement                                               ≤ 30 l/min
Displacement pressure                                  ≤ 0.1 MPa/1.0 bar/15 psi
Transport height                                            ≤ 10 m
Temperature of decalcifying solution               ≤ 50°C


 

August 01, 2017

REMS CamSys 2

REMS CamSys 2 – Brillant pictures and videos of pipes and drains.
Voice recording. Self-levelling camera. SD card slot. Electronic metering. For battery and mains operation.


REMS CamSys 2 – Brillant pictures and videos of pipes and drains. Voice recording. Self-levelling camera. Transmitter for localising the camera. SD card slot. Electronic metering. For battery and mains operation.

Ultra light, handy camera inspection system for inexpensive inspection and damage analysis of pipes, drains, chimneys and other hollow cavities. Self-levelling camera. Transmitter for localising the camera. Electronic metering. Also for inspection after pipe cleaning work and for acceptance of new installations or repairs. Documentation of pictures and videos on SD card. For battery and mains operation.

Camera head S-Color/S-Color S     Ø 25 mm
Camera head S-Color S-N             Ø 33 mm
Pipes                                          Ø (40) 50 – 150 mm
Drains, chimneys other cavities

March 14, 2017

REMS Mini-Press S 22 V ACC

REMS Mini-Press S 22 V ACC – universal up to Ø 40 mm, 1 1/4".
Super light, super small, super handy, ultra fast.
REMS Li-Ion 22 V Technology.

Universal, ultra handy cordless radial press with forced return for making press joints Ø 10 – 40 mm, Ø ⅜ – 1 ¼". The new REMS Li-Ion 22 V Technology sets standards in terms of economy and user friendliness and enables the user to make ultra fast pressings in less than 4 s for 50 % more pressings1). The automatic locking of the pressing tongs and the automatic retraction after completion of the pressing operation (automatic circuit control) give the user additional safety. With a weight of 2.6 kg this cordless radial press enters a new dimension. It can be used everywhere, free hand, over head, also in very confined spaces.

1) Battery Li-Ion 21.6 V in comparison to Battery Li-Ion 14.4 V

January 01, 2017

REMS Hydro-Swing

REMS Hydro-Swing – Effortless working due to oil-hydraulic force transmission.
Ideal for multi-layer composite tubes up to Ø 32 mm. Also for stainless steel tubes up to Ø 22 mm.

Oil-hydraulic hand pipe bender Ø 10 – 32 mm, Ø ⅜ – ⅞", up to 90°.
Soft copper tubes Ø 10 – 22 mm, Ø ⅜ – ⅞", s ≤ 1mm,
Coated soft copper tubes Ø 10 – 18 mm, Ø ⅜ – ⅝", s ≤ 1mm,
Tubes of pressfitting systems in stainless steel Ø 12 – 22 mm, s ≤ 1.2 mm,
Coated soft carbon steel tubes Ø 12 – 22 mm, s ≤ 1.5 mm, soft precision steel tubes Ø 10 – 22 mm, s ≤ 1.5 mm,
Multi-layer composite tubes Ø 14 – 32 mm.

January 21, 2015

REMS Mini-Press 22 V ACC

REMS Mini-Press 22 V ACC – universal up to Ø 40 mm, 1 1/4".
Super light, super small, super handy, ultra fast.
REMS Li-Ion 22 V Technology.

Universal, ultra handy cordless radial press with forced return for making press joints Ø 10 – 40 mm, Ø ⅜ – 1 ¼". The new REMS Li-Ion 22 V Technology sets standards in terms of economy and user friendliness and enables the user to make ultra fast pressings in less than 4 s for 50 % more pressings1). The automatic locking of the pressing tongs and the automatic sequence of the pressing process give the user additional security. With a weight of 2.5 kg and a length including Mini V 15 pressing tongs of only 31 cm this cordless radial press enters a new dimension. It can be used everywhere, free hand, over head, also in very confined spaces.

1) Battery Li-Ion 21.6 V in comparison to Battery Li-Ion 14.4 V

 
m1 mw740
m2 mw 1024, mh 1400 ls
m4 mw 640 mh 960 portrait
m2 mw 320, mh 480 portrait
m5 mw 960 mh 1100 ls
m5b mw 960 mh 2000
m6 iPad quer
m7 iPad hoch
m8 mw 480, mh 320 ls
m9 iphone 4 portrait
m10 iphone 4 landscape
m11 iphone 5 portrait
m12 iphone 5 landscape
m13 520w